B-150 SERIES
Advanced Biological Microscopes for Students
The B-150 series has been designed to fulfill all requirements of educational laboratories. The available models allow a pleasant and effective approach to the world of microscopy. The quality of the optics, the reliability of the mechanical parts and the excellent price/quality ratio rank these instruments at the top of their category.

GENERAL FEATURES
Heads
Binocular observation head, 30 degree inclined and 360 degree rotatable. Interpupillary adjustment 48-75 mm. Diopter adjustment on the left eyepiece. Monocular observation head, 30 degree inclined and 360 degree rotatable.

Focusing
Coaxial coarse and fine focusing mechanism (graduation: 0.002mm) with limit stop to prevent the contact between objective and specimen. Adjustable tension of coarse focusing knob.

Speciment stage
Double layer mechanical sliding stage, 125x116mm, 76x30mm X-Y movement range. Specimen holder for one slide. Vernier scale on the two axes, accuracy: 0,1mm. B-151: plain stage, 125X120mm. B150POL-M and B-150POL-B: rotatable round stage, 120mm diameter.

Illuminators
Light source type: white LED; light intensity controlled by a knob on the left side of the base. LED power: 1W. Color temperature: 6300K LED average lifetime: approx. 50.000h External power supply: 100/240Vac, 50/60Hz. Output: 5Vdc, 500mA.

Condenser
Abbe condenser, 1.2 N.A., precentered. B-151: Abbe condenser 0.65 N.A., precentered. B-150POL-M and B-150POL-B: 1.2 N.A. fixed condenser.

Polarizing models
Microscopes designed for simple polarization analysis. Available in monocular and binocular versions. The two models are equipped with a swing-out polarizer and a slide-out analyzer as well as a rotating table. B-150POL-M and B-150POL-B are suitable for common observations with polarized light in the educational field.

Accessory M-069
Solar battery pack Included battery: rechargeable - Lithium-Poly. Capacity: 2000 mAh. Output voltage: 5,5Vdc. Dimensions: 110x60x15 mm. Autonomy: 7h at max intensity. Charging modes: with solar panel (12h) - with included power supply (6h)

Power supply:
Input Voltage: 100-240Vac / 50-60Hz Output: 5Vdc 500mA (B-150R model: 6Vdc 2,5A) Internal NiMH rechargeable battery (B-150R models only).

ECOVISION SERIES
Entry-level biological microscopes for students
Biological microscopes designed especially for students attending primary and secondary schools. The metal structure combines sturdiness and ease of use. The wide selection of available models allows to choose the most suitable microscope according to the application required.

B-150R Series
This series is the perfect choice for students who want an innovative and easy to use product.
B-150R series comes complete with an internal rechargeable battery for use in the field
Heads: Binocular observation head, 30 degree inclined and 360 degree rotatable. Interpupillary adjustment 48-75 mm. Diopter adjustment on the left eyepiece. Monocular observation head, 30 degree inclined and 360 degree rotatable. Focusing: Coaxial coarse and fine focusing mechanism (graduation: 0.002mm) with limit stop to prevent the contact between objective and specimen. Adjustable tension of coarse focusing knob. Specimen stages: Double layer mechanical sliding stage, 125x116mm, 76x30mm X-Y movement range. Specimen holder for one slide. Vernier scale on the two axes, accuracy: 0,1mm.

B-151R: plain stage, 125X120mm.
B-153R / B-155R / B-157R / B-159R: mechanical.
B150POL-MR and B-150POL-BR: rotatable round stage, 120mm diameter.
Illumination: Light source type: white LED; light intensity controlled by a knob on the left side of the base. LED power: 1W. Color temperature: 6300K. LED average lifetime: approx. 50.000h External power supply: 100/240Vac, 50/60Hz. Output: 6Vdc, 2,5A. Condenser: Abbe condenser, 1.2 N.A., precentered. B-151R: Abbe condenser 0.65 N.A., precentered. B150POL-MR and B-150POL-BR: 1.2 N.A. fixed condenser.

B-150ALC Series
The B-150ALC series has been designed to fulfill all requirements of educational laboratories. The available models allow a pleasant and effective approach to the world of microscopy.0 The quality of the optics, the reliability of the mechanical parts and the excellent price/quality ratio rank these instruments at the top of their category.
ALC - Automatic light control: the level of light is adjusted by the microscope in order to maintain the same level as the one the user has chosen, no matter if the aperture of the diaphragm changes, another objective is inserted, opacity of the sample changes, etc.

Heads: Binocular observation head, 30 degree inclined and 360 degree rotatable. Interpupillary adjustment 48-75 mm. Diopter adjustment on the left eyepiece. Monocular observation head, 30 degree inclined and 360 degree rotatable. Focusing: Coaxial coarse and fine focusing mechanism (graduation:0.002mm) with limit stop to prevent the contact between objective and specimen. Adjustable tension of coarse focusing knob. Specimen stages: Double layer mechanical sliding stage, 125x116mm, 76x30mm X-Y movement range. Specimen holder for one slide. Vernier scale on the two axes, accuracy: 0,1mm.
B-151ALC: plain stage, 125X120mm.
B-153ALC / B-155ALC / B-157ALC / B-159ALC: plain stage, 125X116mm.
B150POL-MALC and B-150POL-BALC: rotatable round stage, 120mm diameter.
Illumination: Light source type: white LED; light intensity controlled by a knob on the left side of the base. LED power: 1W.
Color temperature: 6300K. LED average lifetime: approx. 50.000h
External power supply: 100/240Vac, 50/60Hz. Output: 5Vdc, 500mA.
Condenser: Abbe condenser, 1.2 N.A., precentered.
B-151ALC: Abbe condenser 0.65 N.A., precentered.
B150POL-MALC and B-150POL-BALC: 1.2 N.A. fixed condenser.

B-190 Series:
Biological microscopes for the next teaching generation The B-190 series is the result of a perfect fusion between years of experience in the microscopy field and a refined design study. This series represents our product philosophy at its best: quality, reliability and innovation. The B-190 series is the answer of OPTIKA Microscopes to the challenge of the future in the teaching field.
TECHNICAL SPECIFICATION:
Optical System:
The optical system has been developed for emanding users; it consists of high quality components which guarantees an high image contrast and an excellent optical resolution. The optical components have been designed and treated with special techniques to prevent the formation of moulds and fungi.
Stand:
The stand has a modern and ergonomic design. It is easy to carry the microscope thanks to the large opening behind the revolving nosepiece, to be used as a handle. The opening allows the user to see clearly the objectives and the samples, as requested in discussion groups.
Mechanics:
The moving parts are made by means of machine tools with computerized numerical control reducing manufacturing tolerance and increasing the reliability of the instrument. The strict controls on materials and production processes are optimized through the procedures established by ISO 9001:2008 quality system.
Illumination: The future of illumination. The X-LED2 TM powered illumination system has been developed by our R&D; dept. and consists of a combination of LED and optical technology. A high-efficiency single chip LED improved by a special optical system doubles the light intensity generated by an ordinary LED. The resulting light is comparable to the light generated by a 30W halogen lamp but with a colour temperature of 6300K: this means a white light instead of the yellow one produced by filament lamps. The electric consumption (3W only) proves the high efficiency of this system: the same light intensity with less consumption; 10% of an ordinary 30W halogen lamp?s consumption. In addition, the lifetime of the LED is 50.000 hours instead of the 1.500 hours of an ordinary halogen lamp. .

STEREO Series:
Stereomicroscopes for students This series includes a wide selection of stereomicroscopes range designed to satisfy every need in both teaching and amateur fields. The whole range, from MS-2 to ST-50, is assembled according to the best technical standards. The optical system, thanks to its transparency, quality and depth, is at the top of its category. The series is composed of 17 models, each one designed to satisfy multiple needs.
GENERAL FEATURES:
Versatility:
The range includes a model, the ST-30-2Led, which allows to work without worrying about the electrical power supply, thanks to its rechargable longlife battery. "Cold" light allows an excellent vision of the samples.
Heads:
Binocular heads (except for MS-2 model). ST-40B-2L, ST-40-2L and ST-35-2L models have 360? rotating heads. All remaining models have fixed heads. STX, S-10-P, S-10-L and S-10-2L models have vertical heads.
Specimen stage:
All models have specimen stage fitted with a black/white disc and specimen clips. Models with transmitted light have also a frosted disc.
Illumination: All models have specimen stage fitted with a black/white disc and specimen clips. Models with transmitted light have also a frosted disc.
ST-30-Led with rechargeable batteries: ST-30-Led with rechargeable batteries
Battery box: 3 x AA, 1.2V NiMh ? replaceable by the user
Battery pack: 3 x AA, 1800 mAh
Battery runtime with LED incident light at maximum power: 12 hours
Battery runtime with LED transmitted light at maximum power: 14 hours
Battery charging enabled while using the microscope.

B-290 Series :
This series incorporates all the experience gathered by Optika Microscopes in the field of light microscopy, adapted specifically for routine laboratory brightfield applications. These microscope are suitable for routine microscopy and have an ergonomic design for comfortable long-term use. All main controls are located close together, which enables operation with minimal movements.
GENERAL FEATURES:
Optical system:
The optical system has been developed for demanding users; it consists of high quality components which guarantee an high image contrast and an excellent optical resolution. The optical components have been designed and treated with special techniques to prevent the formation of moulds and fungi.
Stand:
The stand has a modern and ergonomic design. It is easy to carry the microscope thanks to the large opening behind the revolving nosepiece, to be used as a handle. The opening allows the user to see clearly the objectives and the samples, as requested in discussion groups.
Mechanics:
The moving parts are made by means of machine tools with computerized numerical control reducing manufacturing tolerance and increasing the reliability of the instrument. The strict controls on materials and production processes are optimized through the procedures established by ISO 9001:2008 quality system.
Illumination: All models have specimen stage fitted with a black/white disc and specimen clips. Models with transmitted light have also a frosted disc.
ST-30-Led with rechargeable batteries: ST-30-Led with rechargeable batteries
Battery box: 3 x AA, 1.2V NiMh ? replaceable by the user
Battery pack: 3 x AA, 1800 mAh
Battery runtime with LED incident light at maximum power: 12 hours
Battery runtime with LED transmitted light at maximum power: 14 hours
Battery charging enabled while using the microscope.

B-380 Series: Advanced biological microscopes for teachers. Educational and laboratory microscope for routine applications. Dye-cast frame, with high stability and ergonomy, for transmitted light observation. ALC - Automatic light control: The level of light is adjusted by the microscope in order to maintain the same level as the one the user has chosen, no matter if the aperture of the diaphragm changes, another objective is inserted, opacity of the sample changes, etc. In addition, the lifetime of the LED is 50.000 hours instead of the 1.500 hours of an ordinary halogen lamp. GENERAL FEATURES: Heads: Available in binocular or trinocular version. The heads are equipped with interpupillary distance control (55-75 mm) as well with dioptric compensation. All heads are 360 rotatable and 30 inclined. Objectives: Optical system & objectives: The models of the B-380 series are equipped, depending on version, with two different types of optical systems: the standard 160mm one and the infinity corrected system (IOS). In both cases the field diameter of the eyepieces is 20mm. Microscope Stand: Modern and ergonomic, this stand is made of die-cast aluminium. Coarse and fine focusing (graduation: 0.002mm) with coaxial control knobs. Adjustable focusing tension and limit stop. Illumination: The illuminating system consists of X-LED source. The brightness can be adjusted by a rheostat located on the left side of the microscope base. X-LED 3: The future of illumination OPTIKA is proud to introduce its own revolutionary LED powered illumination system. Developed by our R&D; dept. it consists of a new combination of LED and optical technology. A new high-efficiency single chip LED works in combination with a special optical lens, which allows to double the intensity of the light generated by the LED itself. The result is a quantity of light equivalent to the light generated by a standard 50W halogen bulb, but with a colour temperature of 6300K. It means white light instead of the yellow one produced by halogen bulbs. The electrical consumption (3.6W only) shows the high efficiency of the system: same light intensity with less than 10% of the consumption of a standard halogen bulb. Last but not least, the lifetime of our LED is 50.000 hours, instead of 1.500 hours.

SZM Series:
Professional stereozoom microscopes The stereomicroscopes of the SZM series are instruments designed for laboratory and industry applications. Their optical and mechanical qualities place them at the top of their category and the price/quality ratio is excellent. The stereomicroscopes share the same optical system consisting of binocular and trinocular heads with zoom objectives. The four models of the SZM series find their proper application wherever professional instruments are required. Several accessories provide an ample choice of configurations and applications.


GENERAL FEATURES:

Heads:
Binoculars and trinoculars 360 rotating and 45 inclinated.

Interpupillary Distance:
Adjustable between 51 and 75 mm.
Diopetric Compensation:
On both eyepiece tubes (bino & trino).On both eyepiece tubes (bino & trino).

Eye Pieces:
EWF10x/20 mm.
Objectives:
Parfocal achromatic zoom 0,7x...4,5x (6,428:1 zoom factor).
Microscope Stand:
Pillar stand 30 mm and 25 cm high, base 26x20x6h cm. Overhanging stand 42 cm high, 23x23 cm base and 45 cm horizontal arm length.
Illumination: The illuminating system consists of X-LED source. The brightness can be adjusted by a rheostat located on the left side of the microscope base.

LAB Series:
Stereomicroscopes for teachers The LAB series can be considered as the entry-level of the OPTIKA professional stereomicroscopes range. The two models have been designed for end users who need professional quality at low cost.
GENERAL FEATURES:
Heads:
Binocular heads, 360 rotating and 45 inclined.
Interpupillary Distance:
Adjustable between 51 and 75 mm.
Speciment stage:
Fitted with a semi-transparent disc for transmitted light with specimen clips.
Eye Pieces:
WF10x/20 mm.
Objectives:
LAB10: with double magnification (2x-4x) that can be selected by rotating the lens unit. Working distance 80mm.
LAB20: continuous zoom 0,7x ...4,5x. (6,43:1 zoom factor).Working distance: 85 mm..
Microscope Stand:
Fixed arm type with focusing mechanism.
Illumination: Double adjustable illuminator for incident and transmitted light fitted with two high-efficiency LED light sources. The angle of the incident illuminator is adjustable. Voltage: 110/240V ac.

B-150 SERIES
Advanced Biological Microscopes for Students
The B-150 series has been designed to fulfill all requirements of educational laboratories. The available models allow a pleasant and effective approach to the world of microscopy. The quality of the optics, the reliability of the mechanical parts and the excellent price/quality ratio rank these instruments at the top of their category.

GENERAL FEATURES
Heads
Binocular observation head, 30 degree inclined and 360 degree rotatable. Interpupillary adjustment 48-75 mm. Diopter adjustment on the left eyepiece. Monocular observation head, 30 degree inclined and 360 degree rotatable.

Focusing
Coaxial coarse and fine focusing mechanism (graduation: 0.002mm) with limit stop to prevent the contact between objective and specimen. Adjustable tension of coarse focusing knob.

Speciment stage
Double layer mechanical sliding stage, 125x116mm, 76x30mm X-Y movement range. Specimen holder for one slide. Vernier scale on the two axes, accuracy: 0,1mm. B-151: plain stage, 125X120mm. B150POL-M and B-150POL-B: rotatable round stage, 120mm diameter.

Illuminators
Light source type: white LED; light intensity controlled by a knob on the left side of the base. LED power: 1W. Color temperature: 6300K LED average lifetime: approx. 50.000h External power supply: 100/240Vac, 50/60Hz. Output: 5Vdc, 500mA.

Condenser
Abbe condenser, 1.2 N.A., precentered. B-151: Abbe condenser 0.65 N.A., precentered. B-150POL-M and B-150POL-B: 1.2 N.A. fixed condenser.

Polarizing models
Microscopes designed for simple polarization analysis. Available in monocular and binocular versions. The two models are equipped with a swing-out polarizer and a slide-out analyzer as well as a rotating table. B-150POL-M and B-150POL-B are suitable for common observations with polarized light in the educational field.

Accessory M-069
Solar battery pack Included battery: rechargeable - Lithium-Poly. Capacity: 2000 mAh. Output voltage: 5,5Vdc. Dimensions: 110x60x15 mm. Autonomy: 7h at max intensity. Charging modes: with solar panel (12h) - with included power supply (6h)

Power supply:
Input Voltage: 100-240Vac / 50-60Hz Output: 5Vdc 500mA (B-150R model: 6Vdc 2,5A) Internal NiMH rechargeable battery (B-150R models only).

B-380 SERIES
Optical system & objectives
The models of the B-380 series are equipped, depending on the various models, with two different types of optical system: the standard 160mm one and the infinity corrected system (IOS). In both cases the field diameter of the eyepieces is 20mm.

Microscope stand
Modern and ergonomic, this stand is made of die-cast aluminium. Coarse and fine focusing (graduation: 0.002mm) with coaxial control knobs. Adjustable focusing tension and limit stop

Head
Available in binocular or trinocular version. The heads are equipped with interpupillary distance control (55-75 mm) as well as with dioptric compensation. All heads are 30° inclined.

Illumination
The illuminating system consists of X-LED3 source. The brightness can be adjusted by a rheostat located on the left side of the microscope base.

B-500 SERIES
Optical system & objectives
S-Plan and Plan 160mm Finity Corrected Objectives on InfiniFix models. Plan Infinity corrected objectives on all IOS models.br/>
Microscope stand
The modern stand design, with accessible and ergonomic controls, complements and enhances the instrument’s usability

Head
The wide 22 mm field of view and the high-point eyepieces allow for hours of use without eye fatigue.

Illuminators
The B-500 microscopes are equipped with two kinds of illuminators (both with field diaphragm): high-efficiency dichroic 20W halogen illuminator (models with SEMI-PLAN objectives), or our special X-LED illuminator (models with PLAN objectives). Both systems permit light-intensive applications, such as phase contrast or darkfield, without the need of complex active cooling and keeping the electrical consumption at lowest levels
Condenser
Two kinds of swing-out condensers are available (depending on the models): - 0.10/1.20 N.A. for better performances with high magnifications; - 0.22/0.90 N.A. for better performances with low magnifications (pathology).
Specimen stage
A generously sized double layer stage, suitable for two specimen slides, optimally completes the instrument. 175x145mm, X-Y range: 76x51mm.

POL Series
Optical system & objectives
Polarized light microscopy provides all the benefits of brightfield microscopy and offers a wealth of information, which is simply not available with any other optical microscopy technique, such as refractive indices, birefringence, retardation, extinction angle, pleochroism. Polarized light microscopy is best known for its geological applications – primarily for the study of minerals in rock thin sections, but it can also be used to study many other materials. OPTIKA polarizing microscopes offer a complete system for your laboratory analysis, including polarizer and analyzer filters, Bertrand lens for conoscopic observation, compensator plates, and high-precision rotatable stages. Also available the X-LED illumination system, an high-intensity light source which delivers bright and clear images. The extraordinary characteristics of this series are now accessible to all laboratories, meeting the needs of those who are looking for a prime quality instrument.

TRANSMITTED POLARIZING RESEARCH MICROSCOPE
Description: Laboratory microscope for routine and research applications. Dye-cast frame, with high stability and ergonomy, for transmitted light observation.

Transmitted and incident polarizing RESEARCH MICROSCOPE
Description: Laboratory microscope for routine and research applications. Dye-cast frame, with high stability and ergonomy, for transmitted and incident light observation.

FLUO SERIES
LED FLUORESCENCE RESEARCH MICROSCOPE
Description: Laboratory microscope for routine and research applications. Dye-cast frame, with high stability and ergonomy, for transmitted and incident light observation.

FLUORESCENCE RESEARCH MICROSCOPE
Description: Laboratory microscope for routine and research applications. Dye-cast frame, with high stability and ergonomy, for transmitted and incident light observation.

The instrument
XDS-2FL is a routine inverted epifluorescence microscope. The basic structure is dedicated to the most demanding applications of routine fluorescence analysis. XDS-2FL offers, in the same unit, brightfield and phase contrast capabilities, thus extending its potentials to most multicontrast applications.
Optical system
The epifluorescence optical system is implemented via the standard excitation filter-dichroic mirror-barrier filter combination, applied to a 100W Hg lamp. It is supplied with EWF10x/22mm extra-widefield eyepieces, long working distance IOS objectives, and a double filterblock set (blue and green excitation). The extensive range of optional accessories allows a quick interchange of contrast mechanisms and a multi-contrast observation without removal of the specimen from the stage.

B-800 Series
BRIGHTFIELD RESEARCH MICROSCOPE
Description: Laboratory microscope for routine and research applications. Dye-cast frame, with high stability and ergonomy, for transmitted and incident light observation.


PHASE CONTRAST RESEARCH MICROSCOPE
Description: Laboratory microscope for routine and research applications. Dye-cast frame, with high stability and ergonomy, for transmitted light observation.
BRIGHTFIELD RESEARCH MICROSCOPE
Description: Laboratory microscope for routine and research applications. Dye-cast frame, with high stability and ergonomy, for transmitted light observation.
LED FLUORESCENCE RESEARCH MICROSCOPE
Description: Laboratory microscope for routine and research applications. Dye-cast frame, with high stability and ergonomy, for transmitted and incident light observation.

B-1000 Series
Solid Stand – Extra Stability
Completely new design and a die-cast aluminium stand offer solidity and durability, even for the most demanding laboratory use. This new microscope can seamlessly be upgraded with many attachments that extend its field of use.


Modularity – Build your own solution
Many worlds in one instrument. Modularity allows to build the desired solution (brightfield, darkfield, phase contrast, material science, fluorescence, motorized automation and so on). B-1000 has the flexibility to help your work the best way.
X-LED White Illumination
X-LED illumination system is based on a pure white highefficiency LED and a special optics. It guarantees constant color temperature, no heat, and an extreme electrical consumption efficiency. The whole system is pre-aligned and boasts a lifetime of 50.000 hours
Light under control
Intelligent control of the microscope illumination: the “AUTO-OFF” function automatically switches the light off after a user-selectable time period. “BOOST” gives an extra high level of illumination for light-demanding applications. “AUTO” allows to store an illumination level, and to maintain it throughout the inspection.

XDS Series
Ergonomy
Every control is easy to reach, every component has been designed with ease of use in mind. The focusing and specimen translation controls are designed to allow to rest the wrists on the table. The light intensity adjustemnt is placed very close to the focusing knobs. The specimen stage is fitted with a special glass insert, that allows to see the objectives, for immediate identification of the magnification setup. The head implements an extremely innovative design, that permits adjustment to compensate for operator height.


Efficiency
Plan-achromatic infinity corrected optics, bright 8W LED illuminator, phase contrast set, holders for specimen slides, flasks, Petri dishes, trinocular head for photo/video applications. These are the features of XDS-2, a powerful, complete and innovative instrument, designed to set a reference standard for advanced routine microbiology.
User comfort
XDS-2 is comfortable for the operator. The 22 mm extra-wide field is pleasant to use, and minimizes operator stress. The special eyepieces are designed for eyeglass wearers.
Completeness
The multiple access to the optical path ideally complements the infinity-corrected optics, and offers ample freedom for the development of special accessories.The bright 8W LED illuminator, coupled to a full phase ring set, to a photo port, and to the diverse holders for slides, Petri dishes and flasks, qualify XDS-3 as a powerful and complete instrument, that finds its optimal application in high-end routine, and as a complement to the most powerful research microscopes.

LAB Series
Heads
Binocular heads, 360° rotating and 45° inclined.


Interpupillary distance
Adjustable between 51 and 75 mm.
Eyepieces
WF10x/20 mm. LAB-10: Dioptric compensation adjustable on left eyepiece tubes. LAB-20: Dioptric compensation adjustable on both eyepiece tubes.
Specimen stage
Fitted with a semi-transparent disc for transmitted light with specimen clips.
Objectives
LAB-10: with double magnification (2x-4x) that can be selected by rotating the lens unit. Working distance 80mm. LAB-20: continuous zoom 0,7x ...4,5x. (6,43:1 zoom factor). Working distance: 85 mm.
Stand
Fixed arm type with focusing mechanism.
Focusing
Rack and pinion controlled by a pair of knobs placed on both sides of the stand.
Illumination
Double adjustable illuminator for incident and transmitted light fitted with two high-efficiency LED light sources. The angle of the incident illuminator is adjustable. Voltage: 110/240V ac.

SZM Series
Heads
Binocular and trinocular, 360° rotating and 45° inclined.


Interpupillary distance
Adjustable between 51 and 75 mm.
Dioptric compensation
On both eyepiece tubes.
Eyepieces
EWF10x/20 mm.
Objectives
Parfocal achromatic zoom 0,7x...4,5x (6,428:1 zoom factor).
Specimen stage:
Fitted with a black/white disc, specimen clips and a frosted disc for transmitted light.
Focusing
Rack and pinion mechanism controlled by a pair of knobs placed on both sides of the stand.
Stand
Models SZM 1/2: Pillar stand 30 mm diameter and 25 cm high, base: 26x20x6h cm. Models SZM-LED 1/2: Pillar stand 32 mm diameter and 315 mm high, base 27x21x3h cm. Models SZM 3/4: Overhanging stand 42 cm high, 45 cm horizontal arm length, base 23x23cm.
Illumination
Models SZM-1/2: Double, adjustable incident and transmitted light, fitted with two 12V/15W halogen bulbs. The angle of the incident illumination is adjustable. The two models SZM-LED1/2 are equipped with a double high-power LED.

SZN Series
Heads
Binocular or trinocular, 360º rotating and 45º inclined.


Interpupillary distance
Adjustable between 55 and 75 mm. Dioptric compensation on both eyepiece tubes.
Eyepieces
On both eyepiece tubes.
Eyepieces
EWF10x/22mm, high-point.
Working distance
110 mm.
Objectives
Parfocal achromatic zoom 0,67x...4,5x with continuously variable magnification (max. 45x in the standard configuration, can be increased to 225x by using additional accessories).
Specimen stage:
Except overhanging models, the instruments are fitted with a black/white disc for contrast and specimen clamps.
Focusing
By means of rack and pinion system, controlled by a pair of knobs.
Illumination
High efficiency X-LED3 incident illuminators (single or double arm) and 100 mm white LED diffusing disc as transmitted illuminator (60 chip LEDs).
Stands
The series has different stands for every requirement. Simple for vision without transmitted illumination; base for incident and transmitted illumination; overhanging stands (simple or hinged), that allow very large objects to be viewed and to be handled or worked.

SZM-SMD Model
Head
Trinocular, 45°inclined, 360° rotating. Microscope for SMD inspection


Eyepieces
WF10X/20mm, high-point.
Objectives
Zoom 0,7x...4,5x.
Magnification
7x...45x.
Illumination
Optional.
SMD attachment:
Rotatable 360°, vertical working distance 103mm. Oblique working distance 103mm. With inclination adjusting mechanism.

ACCESSORIES Series
Illumination and sample positioning
To achieve the ideal work situation, it is important to combine the right microscope with the right accessories. We offer WIDE range of devices: external illuminator, moving stages, heating stages. Choose the right accessories is an essential process in order to obtain the best performance from your microscope.


Light source
High power 14W LED
Chromaticity coordinates (x,y)
0.320, 0.320 (pure white)
Optical power (with double-arm option)
Illuminance (at 10 cm distance): 70000 lux.
Power supply
Brightness control potentiometer. External power supply provided. Input: 110/240 Vac 50/60 Hz; output: 6 Vdc 5A.
Dimensionsh>
Length: 200 mm Width: 120 mm Weight: 4,1 Kg.

B-190TB & B-290TB
TB Series
Upright Digital Microscopes with Tablet PC
The latest Digital Microscopes with Tablet PC from Optika open new microscopy horizons. Our Microscopes combine high end optics with innovative Digital Technology for microscopic imaging.

Optical system:
The optical system has been developed for demanding users; it consists of high quality components which guarantee an high image contrast and an excellent optical resolution. The optical components have been designed and treated with special techniques to prevent the formation of moulds and fungi.
Stand:
The stand has a modern and ergonomic design. It is easy to carry the microscope thanks to the large opening behind the revolving nosepiece, to be used as a handle. The opening allows the user to see clearly the objectives and the samples, as requested in discussion groups.
Mechanics:
The moving parts are made by means of machine tools with computerized numerical control reducing manufacturing tolerance and increasing the reliability of the instrument. The strict controls on materials and production processes are optimized through the procedures established by ISO 9001:2008 quality system.
Illumination:
X-LED² type with white LED; light intensity control using a knob on left side of the frame. LED power 3W, comparable to a 30-35W halogen bulb.
Camera:
Digital camera resolution: 3.14 MegaPixels Signal output: USB 2.0 - Sensor size: 1/2.5” Sensor technology: CMOS- Image format: 4/3 Full Image Size: 2048x1536. NO driver (microsoft driver). Capture fetures: continuous auto exposure, image size, image capture, compressed video capture. Control parameters: brightness, gain, exposur time, colors, color enhancement.
Tablet PC:
Equipped with Windows 8.1 operating system. Included: Image Analysis software OPTIKA VISION LITE, full view function is also included for a wider Live Camera view. 2GB standard memory. 32GB capacity flash memory. 8’’ screen size. Tablet PC with OPTIKA detachable system.

DM Series
Digital microscopes
The OPTIKA digital microscopes DM are equipped with a camera which is integrated in the head of the microscope, as well as the traditional characteristics of quality and robustness. The entire DM series, from models dedicated to teaching to those intended for laboratory use, is equipped with “plug & play” software. This series is the ideal solution for capturing images and video and transfer them to a PC.

Cabezal:
Digital, monocular, giratorio 360º e inclinado 45º
Ocular:
WF10X/18mm.
Revólver:
Cuádruple
Objetivos:
Acromáticos 4x/0.10, 10x/0.25, 40x/0.65 rectráctil.
Platina:
125x115mm de doble sujeción, mecánica de movimiento XY: 50x30mm.
Condensador:
1.25 N.A. Abbe type.
Enfoque:
Coaxial macro y micrométrico con sistema de seguridad y paro.
Iluminación:
LED blanco de 1W con regulador de intensidad. No recargable.
Resolución cámara digital:
1280x1024 pixels (1.3Mp).
Salida:
Puerto USB 2.0.
Software:
OPTIKA Vision Lite for Windows XP/Vista, Win7, Win8, 32-64 bit
Embalaje:
Poliestireno y caja de cartón.

SZM-D
Digital Stereozoom Microscope
The stereomicroscopes of the SZM series are instruments specifically designed for laboratory and industry applications. Their optical and mechanical qualities place them at the top of that sought-after category of appliances and the price/quality ratio is exceptionally good.

Optical system:
The optical system has been developed for demanding users; it consists of high quality components which guarantee an high image contrast and an excellent optical resolution. The optical components have been designed and treated with special techniques to prevent the formationof moulds and fungi.
Head:
Binocular version available. The heads are equipped with interpupillary distance control (48-75 mm) as well as with dioptric compensation. All heads are 360° rotatable and 30° inclined.
Revólver:
Cuádruple
Stand:
The stand has a modern and ergonomic design. It is easy to carry the microscope thanks to the large opening behind the revolving nosepiece, to be used as a handle. The opening allows the user to see clearly the objectives and the samples, as requested in discussion groups.
Mechanics:
The moving parts are made by means of machine tools with computerized numerical control reducing manufacturing tolerance and increasing the reliability of the instrument. The strict controls on materials and production processes are optimized through the procedures established by ISO 9001:2008 quality system.
Illumination:
B-190TB: X-LED² type with white LED; light intensity control using a knob on left side of the frame. LED power 3W, comparable to a 30-35W halogen bulb. B-290TB: X-LED³ type with white LED; light intensity control using a knob on left side of the frame. LED power 3.6W, comparable to a 50W halogen bulb.
Camera:
Digital camera resolution: 3.14 MegaPixels Signal output: USB 2.0 - Sensor size: 1/2.5” Sensor technology: CMOS - Image format: 4/3 Full Image Size: 2048x1536. NO driver (microsoft driver). Capture features: continuous auto exposure, image size, image capture, compressed video capture. Control parameters: brightness, gain, exposure time, colors, color enhancement.
Tablet PC:
Equipped with Windows 8.1 operating system. Included: Image Analysis software OPTIKA VISION LITE, full screen function is also included for a wider camera Live View. 2GB standard memory. 32GB capacity flash memory. 8’’ screen size. Tablet PC with OPTIKA detachable system.

OPTIKAM Budget Series
Digital cameras
Six low-cost models designed for education and general applications. All cameras are supplied with OPTIKA VISION LITE, a very simple and user-friendly image analysis software. It allows the user to capture images, perform basic measurements and to generate reports.

Optikam Pro HDMI - 1080p High-performance Full HD HDMI camera
Your digital unmet needs find in OPTIKAM Pro HDMI their solution. The years of experience in microscopy have allowed Optika to develop a video/digital camera that meets and fulfills the diverse needs related to imaging. OPTIKAM Pro HDMI is the solution. Digital camera equipped with a 6Mpixels sensor, an 8GB removable SD-card, an useful Mouse to draw the camera into the parameters set-up, C & C-short mount connections and dual USB / HDMI port.
Optikam HDMI Easy- 720P HDMI camera
The years of experience in microscopy have allowed Optika to develop an easy to use 720P HDMI camera that meets and fulfills the different needs related to imaging. OPTIKAM HDMI Easy is the solution. Digital camera equipped with a 5Mpixels sensor, a removable micro SD-Card, a very easy to use keyboard to set the the parameters of the camera, C & C-short mount connections.

Optikam HDMI Easy
The years of experience in microscopy have allowed Optika to develop an easy to use 720P HDMI camera that meets and fulfills the different needs related to imaging. OPTIKAM HDMI Easy is the solution. Digital camera equipped with a 5Mpixels sensor, a removable micro SD-Card, a very easy to use keyboard to set the the parameters of the camera, C & C-short mount connections. OPTIKAM HDMI Easy offers 720P quality images through a simple connection to projector, TV monitor or PC monitor. The camera allows live video 720P images, the ability to record photos and videos directly into the supplied microSD card, or to a PC through the Optika Vision lite software.

Optikam WiFi – Ready to use WiFi camera
Your digital unmet needs find in OPTIKAM WiFi their solution. The years of experience have allowed Optika to develop a WiFi camera that meets and fulfills the diverse needs related to imaging. OPTIKAM WiFi is the solution! Our WiFi camera is equipped with a 5Mpixels sensor, USB connection and C & C-short mount. OPTIKAM WiFi offers the Easiest way to show the camera live view on your Smartphone or on any other O.S. having a wifi connection. The on-board software allows any user to show the camera live view by simply running the browser and introducing the WiFi camera address.
Optikam Pro HDMI - 1080p High-performance Full HD HDMI camera
OPTIKAM Pro HDMI offers the highest quality images through a simple connection to projector, TV monitor or PC monitor. The Onboard software and the mouse allow the user to view, select and modify the parameters of the camera with just one click, they also allows to show, compare and remove the captured images. This innovative system provides live video images in high definition (Full HD 1080p), the ability to record photos and videos directly into the supplied SD-card or connected to a PC, to exploit the full potential of the software OPTIKA IsView.

2 WAJ
HR-110 Hand refractometer, 0-18%
Measuring range: 0-18% Brix Resolution: 0.1% Brix Without ATC.
HR-120 Hand refractometer, 0-32%
Measuring range: 0-32% Brix Resolution: 0.2% Brix Without ATC.
2WAJ ABBE BENCH REFRACTOMETER
Main prism: horizontal Secondary prism: fitted on a hinge Refraction index scale: Nd 1.300 – 1.700 Precision: Nd ± 0.0003 Division: Nd 0.0005 Sugars scale: 0-95% from Nd 1.300 – 1.530 Precision: 0-50% = 0.2%; 51-95% = 0.1% Division: 0,25% Thermometer scale: 0°C - 70°C, div. 1°C Weight: 4 Kg Size: 140 x 100 x 235 m

POL-1
POL-1 BENCH POLARIMETER
Circular polarimeter using Nicol prisms, with monochrome light source (589.3 Nm sodium bulb). Measurement range: ± 180° Precision: 0.05% Division: 1° Magnification: 3x Eyepiece: with fine focusing Stabilisation time: 5 mins. approx. Polarimeter tubes: 100 mm and 200 mm Size: 510 x 135 x 380 mm Power supply: 230V/50Hz, 30W Replacement parts for POL-1 polarimeter:
2WAJ ABBE BENCH REFRACTOMETER
Main prism: horizontal Secondary prism: fitted on a hinge Refraction index scale: Nd 1.300 – 1.700 Precision: Nd ± 0.0003 Division: Nd 0.0005 Sugars scale: 0-95% from Nd 1.300 – 1.530 Precision: 0-50% = 0.2%; 51-95% = 0.1% Division: 0,25% Thermometer scale: 0°C - 70°C, div. 1°C Weight: 4 Kg Size: 140 x 100 x 235 m

HR-Series
The years of experience in microscopy have allowed Optika to develop an easy to use 720P HDMI camera that meets and fulfills the different needs related to imaging. OPTIKAM HDMI Easy is the solution. Digital camera equipped with a 5Mpixels sensor, a removable micro SD-Card, a very easy to use keyboard to set the the parameters of the camera, C & C-short mount connections. OPTIKAM HDMI Easy offers 720P quality images through a simple connection to projector, TV monitor or PC monitor. The camera allows live video 720P images, the ability to record photos and videos directly into the supplied microSD card, or to a PC through the Optika Vision lite software.

2WAJ ABBE BENCH REFRACTOMETER
Main prism: horizontal Secondary prism: fitted on a hinge Refraction index scale: Nd 1.300 – 1.700 Precision: Nd ± 0.0003 Division: Nd 0.0005 Sugars scale: 0-95% from Nd 1.300 – 1.530 Precision: 0-50% = 0.2%; 51-95% = 0.1% Division: 0,25% Thermometer scale: 0°C - 70°C, div. 1°C Weight: 4 Kg Size: 140 x 100 x 235 mm.
POL-1 BENCH POLARIMETER
Circular polarimeter using Nicol prisms, with monochrome light source (589.3 Nm sodium bulb). Measurement range: ± 180° Precision: 0.05% Division: 1° Magnification: 3x Eyepiece: with fine focusing Stabilisation time: 5 mins. approx. Polarimeter tubes: 100 mm and 200 mm Size: 510 x 135 x 380 mm Power supply: 230V/50Hz, 30W Replacement parts for POL-1 polarimeter:

HRD Series
HRD-300 Réfractomètre numérique 0-45%
Plage de mesure Brix: 0-45% Résolution Brix: 0.1% Brix Compensation automatique de la plage de température: 0-40°C, 32-104°F Precision de mesure de la température: 1°C, 2°F Résolution de la température 0.1°C Température de fontionnement 0-35°C, 32-90°F Température de stockage: 0-50°C, 32-122°F Dimension et poids: 185x59x45mm, 230g . Alimentation: 1 batterie 9v Alarme de basse tension.
2WAJ REFRACTOMÈTRE D’ABBE
Prisme principal: prisme secondaire horizontal: monté sur une charnière Echelle d’indice de réfraction: Nd 1.300 – 1.700 Précision: Nd ± 0.0003 Division: Nd 0.0005 Echelle de sucres: 0-95% de Nd 1.300 – 1.530 Précision: 0-50% = 0.2%; 51-95% = 0.1% Division: 0,25% Plage de température: 0°C - 70°C, div. 1°C Poids: 4 Kg . Dimensions: 140 x 100 x 235 mm.
POL-1 POLARIMÈTRE DE TABLE
Polarimètre circulaire utilisant les prismes de Nicol, avec source de lumière monochrome. (589.3 Nm ampoule de sodìum). Plage de mesure: ± 180° Précision: 0.05% Division: 1° Grossissement: Oculaire 3x: avec mise au point fine Temps de stabilisation: 5 mins. approx. Tube polarimètre: 100 mm et 200 mm Dimensoins: 510 x 135 x 380 mm . Alimentation: 230V/50Hz, 30W.

LIFE SCIENCE
Illumination
Light source type X-LED8 with white 8W LED; light intensity control using a knob on front side of the frame. Color temperature: 6300K LED average life time approx. 50.000h Voltage: 110/240Vac, 50/60Hz, 1A ; Fuse: T500mA 250V Max power required: 13W.
Observation Modes
Brightfield, phase contrast.
Focusing
Coaxial coarse and fine focusing mechanism (graduated, 0.002mm) with upper stop, to prevent the contact between objective and specimen. Adjustable tension of coarse focusing knob.
Stage
Fixed stage, dimensions 250x230 mm. Mechanical stage mountable on the right side of the stage, X-Y translation range 119x70 mm, with metallic interchangeable inserts for slides, Petri dishes, Terasaki, multi-Well plates, etc. Pair of side extensions to expand the surface of the stage . Glass stage insert with hole for small dimension specimens.
Nosepiece
Quintuple revolving nosepiece, rotation on ball bearings.
Head
Trinocular observation head, inclined 30° and rotatable 360°. Diopter adjustment on left eyepiece. Interpupillary adjustment 55-75 mm. Splitting ratios (eyepieces-photo tube): 100-0 / 50-50 .
Eyepieces
Wide field eyepieces EWF10X/22 with field number 22.
Objectives
Infinity corrected optical system IOS (Infinity Optical System). Plan-achromatic LWD objectives infinity corrected, for thickness 1,2 mm, made by following objectives: -) Plan-achromatic IOS LWD 4X, N.A. 0.10, W.D. 18,0 mm -) Plan-achromatic IOS LWD 10XPh, N.A. 0.25, W.D. 10,0 mm -) Plan-achromatic IOS LWD 20XPh, N.A. 0.40, W.D. 5,1 mm -) Plan-achromatic IOS LWD 40X, N.A. 0,65, W.D. 2,6 mm All objectives are treated with an anti-fungus treatment.
Condenser
LWD condenser, N.A. 0.30, working distance 72 mm. The condenser can be removed to extend the working distance up to 150 mm. Precentered slider with phase ring 10X/20X.
Dimensions
HEIGHT: 473 mm WIDTH: 250 mm DEPTH: 515 mm WEIGHT: 9 kg
Accessories
HEIGHT: 473 mm Instruction manual and dust cover included

MATERIAl SCIENCE
Illumination
Light source type X-LED3 ; light intensity control using a knob on left side of the frame. LED power: 3.6W, comparable to a 50W halogen bulb. Color temperature: 6300K LED average lifetime: approx. 50.000h. The light exit can be used as a filter holder for additional filters (blue, yellow, frosted). Voltage: 110/230Vac, 50/60Hz, 0,4/0,8A; Fuse: T3.15A 250V Max power required: 7W.
Observation Modes
Brightfield, phase contrast.
Focusing
Coaxial coarse and fine focusing mechanism (graduated, 0.002mm) with upper stop, to prevent the contact between objective and specimen. Adjustable tension of coarse focusing knob.
Stage
Double layer with mechanical sliding stage, size 175x145mm, X-Y movement range 76x52, specimen holder for two slides. Vernier scale on the two axes, accuracy 0,1 mm.
Nosepiece
Quintuple revolving nosepiece, rotation on ball bearings.br> Head
Trinocular observation head, inclined 30° and rotatable 360°. Diopter adjustment on left eyepiece. Interpupillary adjustment 55-75 mm.
Eyepieces
One pair: 12,5X Walton-Beckett eyepieces with focus adjustment. Field number 18. One pair: widefield eyepieces WF10X/22 with field number 22.
Objectives
Infinity corrected optical system InfiniFix Plan-achromatic objectives with mechanical tube lenght 160 mm, made by following objectives: -) Plan-achromatic 4X, N.A. 0,10, W.D. 9,10 mm -) Plan-achromatic 10X, N.A. 0,25, W.D. 1,30 mm -) Plan-achromatic 40X, N.A. 0,65, W.D. 0,25 mm -) Plan-achromatic 40XPH, N.A. 0,65, W.D. 0,25 mm for phase contrast -) Plan-achromatic 100X, N.A. 1,25, W.D. 0,10 mm (oil immersion) All objectives are treated with an anti-fungus treatment.
Condenser
-) Phase contrast condenser for 40XPH objective. -) Swing-out type condenser, N.A. 1,25. Both condensers with centering system.
Dimensions
HEIGHT: 473 mm HEIGHT: 420 mm WIDTH: 250 mm DEPTH: 290 mm WEIGHT: 8 kg
Accessories
HEIGHT: 473 mm Instruction manual and dust cover included.

EDUCATION
Illumination
Light source type: white LED; light intensity control using a knob on left side of the frame. LED power: 1W. Color temperature: 6300K LED average lifetime approx.: 50.000h External power supply 100/240Vac, 50/60Hz, output: 5Vdc 500mA.
Observation Modes
Brightfield.
Focusing
Coaxial coarse and fine focusing mechanism (graduated, 0.002mm) with upper stop, to prevent the contact between objective and specimen. Adjustable tension of coarse focusing knob.
Stage
Double layer with mechanical sliding stage, size 125x116mm, X-Y movement range 76x30. Specimen holder for one slide. Vernier scale on the two axes, accuracy 0,1 mm.
Nosepiece
Quadruple revolving nosepiece, rotation on ball bearings.
Head
Monocular observation head, inclined 30° and rotatable 360°.
Eyepieces
Widefield eyepieces WF10X/18 with field number 18mm.
Objectives
Achromatic objectives with mechanical tube lenght 160 mm, made by following objectives: -) Achromatic DIN 4X, A.N. 0.10, W.D. 18 mm -) Achromatic DIN 10X, A.N. 0.25, W.D. 7 mm -) Achromatic DIN 40X, A.N. 0.65, W.D. 0,53 mm -) Achromatic DIN 100X, A.N. 1,25, W.D. 0,13 mm (oil immersion) All objectives are treated with an anti-fungus treatment.
Condenser Dimensions
HEIGHT: 473 mm HEIGHT: 350 mm WIDTH: 170 mm DEPTH: 210 mm WEIGHT: 4 kg
Accessories
HEIGHT: 473 mm Instruction manual and dust cover included.

ENVIRONMENTALSCIENCE
Models
Monocular with fixed table; objectives 4x, 10x, 40x
Illumination
Light source type: white LED; light intensity control using a knob on left side of the frame. LED power: 1W. Color temperature: 6300K LED average lifetime approx.: 50.000h External power supply 100/240Vac, 50/60Hz, output: 5Vdc 500mA
Observation Modes
Brightfield.
Focusing
Coaxial coarse and fine focusing mechanism (graduated, 0.002mm) with upper stop, to prevent the contact between objective and specimen. Adjustable tension of coarse focusing knob.
Stage
Plain stage 125X120mm.
Nosepiece
Quadruple revolving nosepiece, rotation on ball bearings.
Head
Monocular observation head, inclined 30° and rotatable 360°.
Eyepieces
Widefield eyepieces WF10X/18 with field number 18mm.
Objectives
Achromatic objectives with mechanical tube lenght 160 mm, made by following objectives: -) Achromatic DIN 4X, A.N. 0.10, W.D. 18 mm -) Achromatic DIN 10X, A.N. 0.25, W.D. 7 mm -) Achromatic DIN 40X, A.N. 0.65, W.D. 0,53 mm All objectives are treated with an anti-fungus treatment.
Condenser
Abbe condenser N.A. 0.65 precentered.
Dimensions
HEIGHT: 473 mm HEIGHT: 350 mm WIDTH: 170 mm DEPTH: 210 mm WEIGHT: 4 kg
Accessories
HEIGHT: 473 mm Instruction manual and dust cover included.

OTHER APPLICATIONS
Models
CL-30
Illumination
Description: Double flexible arm (L = 60 cm) with double LED 2W.
Chromaticity coordinates (x,y):
0.320, 0.320 (pure white).
Optical power:
Luminous flux: 160 lumen Illuminance (at 10 cm distance): 50000 lux.
Aperture angle:
35°.
Power supply:
External power supply provided. Input: 110/240 Vac 50/60 Hz; output: 12 Vdc 1500 mA.